In development. A pre-order is a free request: no payment is taken.
Press and hold the display to squeeze the brakes.
Three jobs on every ride.
AIR LOCK sits between your hands and your brakes. It shows how hard you are braking, helps when a wheel is about to lock, and brakes for you when something is too close.
See your braking
Two arcs rise from the bottom of the display as you pull each lever. A light touch stays green. Harder pulls climb through yellow, orange and dark blue to red. When you pull both levers, the number splits into B for the rear brake and F for the front.
Green1 to 24%
Yellow25 to 39%
Orange40 to 66%
Dark blue67 to 84%
Red85 to 100%
Stay unlocked with ABS
When you brake hard and a wheel is about to lock, a small motor on each brake pulses it for you, and an orange ABS icon blinks on the display. The pulse rate is adjustable from the display or the rider app. It starts at 15 Hz.
ABS
Brake force, pulsed to keep the wheel turning
Brake automatically
A distance sensor looks ahead of the bike. If something gets too close at speed, auto brake applies the brakes, a red AB icon blinks on the display and the buzzer sounds an emergency beep.
AB
Obstacle detected. Brakes applied before the gap closes.
Also on board
Speed and batterySpeed in km/h sits under the brake number. Battery level and time sit at the top.
Battery warningsCharge reminders at 25, 20, 15 and 10 percent. Sleep at 9 percent. Lock at 2 percent.
Part checksA toast message appears if a brake unit or the sensor loses its link, with a shortcut to Connected Devices.
One-time brake setupSetUP asks you to pull each lever to its end once, so 100% always means your full pull.
Sleep clockSleep turns the screen off but keeps touch awake. A tap brings the display back.
Sounds with purposeA start-up chime and tap sounds on the speaker. The buzzer is kept for errors, ABS and auto brake.
Five small units, one wireless link.
Every part of AIR LOCK is its own small board. They talk to each other over ESP-NOW, a direct radio link between ESP32 boards, so there is no router and no internet needed on the bike.
Display unitXIAO ESP32-S3 with the 1.28 inch round touch display. It runs KS AIR LOCK OS, hosts the bike's Wi-Fi network and makes every braking decision.
Front brake unit (F)ESP32-C3 with a sleeve motor, a rotary encoder that measures lever pull, and its own battery.
Rear brake unit (B)The same build as the front unit, set up as the rear brake.
Sensor unitXIAO ESP32-S3 Sense with a VL53L1X time-of-flight sensor that measures the distance ahead.
Speed unitESP32-C3 with an MPU6050 gyroscope, plus an optional A3144 hall sensor and magnet on the wheel.
Your phone is the second screen.
The rider app runs in your phone's browser and connects to the bike's own Wi-Fi network, so it works without mobile data. It shows everything the display shows, and more.
Pair in a minutePick the KS AIR LOCK network, then tap Allow on the bike's display to confirm your phone.
Reports that wait for youAlerts and errors are held on the bike while no phone is connected, and arrive the moment you connect.
Find My BikeRings the buzzer and speaker until you stop it from the app or on the bike.
Setup and calibrationStart SetUP from the app and the bike walks you through calibrating both brakes.
Your settingsRename the bike's Wi-Fi network, join your home Wi-Fi, set the time and tune ABS.
Updates with release notesSee what is new, then install without touching the bike's display.
Try it yourself.
A working simulation of the bike display and the rider app. Power the bike on, squeeze the levers, trigger ABS and auto brake, and install a sample update. Nothing here is connected to real hardware.
Loading the demo
The demo is easiest to use on a bigger screen. On a phone, open it full screen.
Pre-orders need this site to be online. Open it from its web address and try again.
Brand, owner and developer.
Everything on this page about who makes AIR LOCK, and who it belongs to.
Owned by KS
KS AIR LOCK and the RYDOVEX™ brand are owned by KS.
RYDOVEX™ · Intelligent Cycling Systems
Product
KS AIR LOCK
Model
AL67
Version
1.0
Brand
RYDOVEX™, “Intelligent Cycling Systems”
Owned by
KS
Developer
Kaviru Sadil
Operating system
KS AIR LOCK OS
Display
1.28 inch round touch display
Main board
XIAO ESP32-S3
Link between units
ESP-NOW radio
Rider app
KS AIR LOCK app, served by the bike over its own Wi-Fi
Status
In development. Pre-orders open.
Kaviru Sadil
Owner and developer of KS, and the developer of KS AIR LOCK, the KS AIR LOCK OS and its apps.
Questions, answered.
Can I buy AIR LOCK today?
Not yet. AIR LOCK is still in development, which is why this page takes pre-orders as free requests. KS will contact you when it is ready to order.
Do I pay anything now?
No. A pre-order takes no payment and no card details. You can cancel it from this page while it is still a request.
Why do I have to sign in with Google?
So every pre-order belongs to a real account, and you can see or cancel it later without a password. Google tells us your name and email address. It does not tell us your password.
Does the rider app need internet?
No. Your phone joins the bike's own Wi-Fi network, called KS AIR LOCK, and the app talks to the bike directly. You only need internet to download an update.
Is the demo the real thing?
The demo is a simulation of the display and the rider app that you can try in your browser. It shows how AIR LOCK is designed to behave. It is not connected to a bike.
Who owns AIR LOCK?
KS AIR LOCK and the RYDOVEX™ brand are owned by KS. Kaviru Sadil is the developer.
Allow anonymous analytics (Google Analytics) to see which parts of this site are used? It stays off unless you allow it.
Privacy notice
This site is run by KS. This notice says what we collect when you sign in and pre-order, and why.
What we collect
From Google when you sign in: your name, email address, profile picture and a Google account ID. We never receive your password.
From the pre-order form: the details you type in (name, phone, country, city, bike and brake type, number of units and notes), the time you sent it and its status.
Only if you allow it: anonymous usage statistics from Google Analytics for Firebase.
Why
To record your pre-order, contact you about it and manage KS AIR LOCK pre-orders. We do not sell your data and we do not use it for advertising.
Where it is stored
In Google Firebase (Authentication and Cloud Firestore), which are services of Google. Only you and the KS admin can read your pre-orders.
Your choices
You can cancel or delete your own pre-orders from the list under the form, as long as they are still requests or cancelled. You can sign out at any time. To ask for your data to be corrected or removed, use the contact details in the page footer.
Pre-order terms
A pre-order is a request to be contacted when KS AIR LOCK is ready to order. It is not a purchase and it takes no payment.
KS AIR LOCK is in development. Its features, appearance, price and release date can change.
Sending a pre-order does not reserve a unit or guarantee that KS will accept it. KS marks each request as confirmed or cancelled.
You can cancel your request from this page while it is still a request.
You must sign in with your own Google account and give correct details.
Credits
KS AIR LOCK, RYDOVEX™ and the KS logo belong to KS. Developed by Kaviru Sadil.
Typefaces: Barlow, Barlow Condensed, Unbounded and IBM Plex Mono, used under the SIL Open Font License 1.1 (scripts.sil.org/OFL).